Interface Cards & Controllers

What You Should Know About Making Duvet Covers

Are you thinking of making your own duvet cover? Then you are just the right person to read this article. Just take a note pad and a pen and read through this article right to the end.

 

There are a number of alternative ways to make duvet covers. My focus will be on just one specific one. Let me say this before you get all worked up – Making a duvet cover is not hard but you do need to follow all the steps that are discussed below. There is no need to stress about discount duvet covers Or for those brand powered ones like potterybarnduvet

First thing first, choose the fabric you will be using. You will also have to take some measurements that is you will have to measure the length and the width. You need to know the size of the bed you will be using it on. For example, is it a queen, king, twin or single bed?

Now here is my advice. Two things, look for a washable material and (2) make sure it does offer some decorative appeal. I suggest you go for a lightweight fabric that will feel comfortable. While you are making those choices do not forget to think about the climatic conditions of your area.

Start by choosing two lengths of fabric spanning about 54 inches. It is always good to make it slightly wider. This will be used on the front of the duvet cover. Be sure that the panels are the same size as the measurements of the length as mentioned earlier.

-Look for fabric that is a home decorator. These should be about 54 inches wide that is able to cover a duvet cover to 104 inches wide. Chances are your duvet is wider. In this case simply buy another panel of fabric for each of the duvet sides.

-Now you must think about patterns and prints that you like. depending on the type of prints you will go for some adjustments may be necessary. for instance, you may have to elongate your panels.

-Prewash and iron the fabric.

-Now simply fold the front panel in half lengthwise.

-You may need to use an iron to make some sharp creases at the folds. It will then be easy to continue once you’ve done that.

-you will have to do this to the panels at the back too.

-Now you need to draw a line that goes down the length of the crease on the panel. You will need a fabric marking pen and a yard stick for this task.

-you need to make six panels by cutting out each line. i.e., three will be used for the back and then three shall be used on the front part of the cover.

-Once you have done all that the other thing to do on how to make duvet covers is to simply pin one panel that is narrow to one side of the front panel that is still uncut. pin it down so that all the edges of the material are tightly knit together and make sure that the sides are also lined up quite as well.

These tips provided above should be enough for you to create your own duvet cover. Yes there might be a few more steps to go but then it is all up to you how you want to wrap it all up and make one that will suite just your taste and style.

more useful reading

Discount Full Size Duvet Covers

 

Skyline High student is in two bands in voting round of School Jam USA (Salt Lake Tribune)

#### Skyline High student is in two bands in voting round of School Jam USA

The Salt Lake Tribune

##### Published Nov 14, 2011 01:20PM MDT

Chris Petty, 17, a student at Skyline High School, is in two bands that have
been accepted in to the voting round of a national battle of the bands called
School Jam USA. In this contest, if either (or both) band is selected to move
on, the bands will get the opportunity to play in front of a panel of judges
at the 2012 NAMM convention in Anaheim, California for the final round of the
competition. If they do well in the final round, they will win money for new
gear and money that will help benef...

##### Copyright 2011 The Salt Lake Tribune. All rights reserved. This
material may not be published, broadcast, rewritten or redistributed.

Salt Lake Tribune

Build a PC - 5: Front Panel Connectors