Interface Cards & Controllers

What is the function of BeePROG Universal Programmer?

BeePROG Universal Programmer

Short description:
--33901 supported devices by 2.42 version of SW (13. Sep. 2007)
--extremely fast programming, one of the fastest programmers in this category. Programs 16-Mbit Flash memory less than 18 seconds
--48-pins powerful pindrivers, no adapter required for any DIL devices
--connector for in-circuit programming (ISP)
--dual connection to PC: USB or parallel (printer) port
--USB 2.0/1.1 compatible interface
--alternatively high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface
--comfortable and easy to use control program, Windows 95/98/Me/NT/2000/XP/2003/XPx64 compatible
--Multiprogramming possible by attaching more programmers to one PC
--warranty - 3 years

Specification
HARDWARE
Base unit, DACs
--USB 2.0 port
--FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
--on-board intelligence: powerful microprocessor and FPGA based state machine
--three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
--VCCP range 0..8V/1A
--VPP1, VPP2 range 0..26V/1A
--autocalibration
--selftest capability
--protection against surge and ESD on power supply input, parallel port connection

ZIF socket, pindriver
--48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 48-pin
--pindrivers: 48 universal
--VCCP/VPP1/VPP2 can be connected to each pin
--perfect ground for each pin
--FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
--analog pindriver output level selectable from 1.8 V up to 26V
--current limitation, overcurrent shutdown, power failure shutdown
--ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
--continuity test: each pin is tested before every programming operation

ISP connector
--10-pin male type with missinsertion lock
--5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
--1x VCCP voltage (range 2V..7V/100mA), can be applied to pins 1, 3
programmed chip voltage (VCCP) with both source/sink capability and voltage sense
--1x VPP voltage (range 2V..25V/50mA), can be applied to pins 2,3,4,6,8,10
--target system supply voltage (range 2V..6V/250mA)

DEVICE SUPPORT
Programmer, in ZIF socket
--EPROM: NMOS/CMOS, 2708*, 27xxx and 27Cxxx series, with 8/16 bit data width, full support for LV series
--EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
--Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx --series, from 256Kbit to 32Mbit, with 8/16 bit data width, full support for LV series
Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series
--Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx, AT17xxx, 37LVxx
--1-Wire E(E)PROM: DS1xxx, DS2xxx
--PROM: AMD, Harris, National, Philips/Signetics, Tesla, TI
--NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
--PLD: Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE
--PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA, ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx
--PLD: Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
--other PLD: SPLD/CPLD series: AMI, Atmel, AMD-Vantis, Gould, Cypress, ICT, Lattice, NS, Philips, STM, VLSI, TI
--Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49, 87x50 series
--Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, all manufacturers, Philips LPC series
--Microcontrollers Intel 196 series: 87C196 KB/KC/KD/KT/KR/...
--Microcontrollers Atmel AVR: AT90Sxxxx, ATtiny, ATmega series
--Microcontrollers Cypress: CY8Cxxxxx
--Microcontrollers ELAN: EM78Pxxx
--Microcontrollers MDT 1xxx and 2xxx series
--Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, dsPIC series
--Microcontrollers Motorola (Freescale): 68HC05, 68HC08, 68HC11 series
--Microcontrollers Myson MTV2xx, 3xx, 4xx and 5xx series
--Microcontrollers National: COP8xxx series
--Microcontrollers NEC: uPD78Fxxx series
--Microcontrollers Scenix (Ubicom): SXxxx series
--Microcontrollers SGS-Thomson: ST6xx, ST7xx, ST10xx series
--Microcontrollers TI: MSP430 and MSC121x series
--Microcontrollers ZILOG: Z86/Z89xxx and Z8xxx series
--Microcontrollers other: EM Microelectronic, Fujitsu, Goal Semiconductor, Hitachi, Holtek, Princeton, Macronix, Winbond, Infineon(Siemens), Samsung, Toshiba, ...

Programmer, through ISP connector
--Serial E(E)PROM: IIC series, MW series, SPI series, KEELOQ series, serial data Flash, PLD configuration memories
--Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny, ATmega series
--Microcontrollers Cypress: CY8C2xxxx
--Microcontrollers Elan: EM78Pxxx, EM6xxx series
--Microcontrollers EM Microelectronic: 4 and 8 bit series
--Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, dsPIC series
--Microcontrollers Motorola/Freescale: HC11 series, HC908 series (both 5-wire, All-wire)
--Microcontrollers NEC: uPD7xxx series
--Microcontrollers Philips: LPC2xxx series, LPC series, 89xxx series
--Microcontrollers Scenix (Ubicom): SXxxx series
--Microcontrollers TI: MSP430 (both JTAG and BSL series), MSC12xxx series
--PLD: Lattice: ispGAL22xV10x, ispLSI1xxxEA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, M4-xx/xx, M4LV-xx/xx, M4A3-xx/xx, M4A5-xx/xx, LC4xxxB/C/V/ZC
--Various PLD (also by JAM player/JTAG support):
Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX 9000, MAX II
Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II

More details, please visit http://iautotool.com/beeprog-universal-programmer-p-120.html

IAutotool.com, a professional car diagnostic tools wholesale online store, is the official  site of  IAutotool, Co.,Ltd, a leading auto tools manufacturer from Shenzhen China. We  specialize in high quality OBD Tools, Professional Diagnostic Tools, Code Scanners, ECU Chip  Tunning Tool, Auto Key Programmers, Airbag Reset Kits, Odometer Correction Kits and so on.

Everyone expects to get good product for what he/she paid, So quality is always one of  buyer's biggest concern prior to buying. Only providing qualified Car Tools is our solemn  promise. Just good products are not enough. Excellent technical support is also vital to  buyers. IAutotool has been dedicated to Car tools sales since foundation, and has rich  experience in solving possible problems buyer may encounter. Each item shipped out from  Iautotool are carefully checked by a responsible QA team before packing. They will check the  performance of every function. Real pictures taken from the items are the best explanation.  So you can feel reliability here.

 

About the Author

IAutotool.com, a professional car diagnostic tools wholesale online store, is the official  site of  IAutotool, Co.,Ltd, a leading auto tools manufacturer from Shenzhen China. We  specialize in high quality OBD Tools, Professional Diagnostic Tools, Code Scanners, ECU Chip  Tunning Tool, Auto Key Programmers, Airbag Reset Kits, Odometer Correction Kits and so on.

Everyone expects to get good product for what he/she paid, So quality is always one of  buyer's biggest concern prior to buying. Only providing qualified Car Tools is our solemn  promise. Just good products are not enough. Excellent technical support is also vital to  buyers. IAutotool has been dedicated to Car tools sales since foundation, and has rich  experience in solving possible problems buyer may encounter. Each item shipped out from  Iautotool are carefully checked by a responsible QA team before packing. They will check the  performance of every function. Real pictures taken from the items are the best explanation.  So you can feel reliability here.

An Important Quick Look At Some Essential Attributes Of The Dell 3110C Printer

Taking advantage of the laser technology, the Dell 3110C printer with Dell Color Laser 3110C cartridge, can yield both color and monochrome printout requirements. It's suited for installation in a busy workplace, especially because a duplexer may be installed (sold separately). Using it with a single computer or a network is possible with the multiple connectivity interfaces available.

With minimal buttons and a status LCD on the top panel of this black office printer, operation becomes a cinch. There's a 400MHz processor within it, making it able to churn out up to 31 monochrome and 17 color letter-size pages with Dell toner per minute. However, such speeds may still vary depending on certain factors such as the content of the document.

Providing your everyday printing tasks, there's the internal memory amounting to 128MB. But with the purchase of a higher DIMM 200-pin type SDRAM, such capacity may be upgraded to as high as 1152MB. With this feature, the machine can catch up with your changing demands. Printer languages included are PostScript 3 with 136 fonts, PCL 6 and 5e with 81 fonts combined.

One thing that's missing here is a wireless connectivity option. Hooking it up to a single computer is made easy by the presence of both a parallel IEEE 1284 (EPP/ECP) and hi-speed USB 2.0 ports. Likewise, there are a variety of operating systems it's compatible with for hassle-free installation. The Ethernet 10Base-T/100Base-TX port allows it to be shared by a network of computers.

Both color and monochrome tasks take advantage of the 600 x 600 dots per inch maximum resolution. It's good enough for churning out crisp text and detailed graphics. Helping you enjoy documents that look professionally rendered is Dell's very own 2400 IQ Image Enhancement Technology.

It can handle a wide variety of media types from plain paper, coated, recycled, transparencies, labels, cards and envelopes. Media sizes supported include letter, legal, executive, B5, A5 and A4. Total media handling capacity amounts to 400 sheets, which is comprised of a single input tray and a manual feed slot. As mentioned earlier, an optional duplexer may be attached for fast, two-sided printing.

Already included when you purchase this office printer are 4 toner cartridges. These include black, magenta, yellow and cyan. With the exception of the black toner cartridge, which can yield as many as 5000 pages, all of them are capable of yielding 4000 pages. The manufacturer has set the duty cycle to 60000 pages per month.

It may be placed in an office regardless of the decor already there because of its elegant black color. It has a body measuring 18.5" (height) x 15.8" (width) x 19.1'" (depth). Since it's a bit heavy, weighing 52.9 pounds, having a designated space for it is recommended instead of having to move it around the office each time.

Because the Dell 3110C printer with Dell Color Laser 3110C cartridge, uses laser technology, it's a more economical choice. A laser machine generally helps maintain lower cost per page using Dell Color Laser printer toner cartridge. This is due to the fact that consumables are less expensive with compatible toner cartridges. While it may come with a steeper price tag than an inkjet initially, the money-saving advantage can be felt in the long run.

How do I change my parallel port from EPP to STP in Dell Dimension 2400 BIOS?

I want to change my printer portparallel port mode. The options are AT PS2 ECP EPP and Off. I looked it up and this computer does have SPP but it doesn't list SPP in the BIOS. Anyone know how to get it?

Most motherboard these days can't force their parallel port into SPP (Standard Parallel Port) mode, because of electrical layouts and pins. Check the BIOS for one of these, "Compatible", "Normal" or "Standard" mode. If the BIOS doesn't have these modes, then you are stuck. A BIOS upgrade will not help, as the motherboard just doesn't have the electrical layout to support real SPP mode.

The bigger question here is, why do you need SPP mode at all? Are you hooking up an ancient piece of hardware? A lot of supposed "SPP only" hardware will work just fine in other modes.

Интерфейс IEEE 1284