Single Connector Attached
2008
 |
No items matching your keywords were found.
Learning To Make Fiber Optic Connectors Installation Easily
Fiber optic is identified as a technology which utilizes glass threads for transmitting data. Fiber optic cables come with a bundle of glass threads in which each of them is able to transmit messages that modulated onto light waves. By using this equipment, you can transmit your data digitally.
Additionally, the manufacture of fiber optic could be complex. However, the installation of fiber optic connections can be quite easy. The installation process involves gluing bare fiber optic cable to the connector and heating the connector to seal it. If you want to create fiber optic cable connection, you can find that the process could be accomplished within 30 minutes.
If you want to find out about the installation of fiber optic connectors, you have come to the best corner. At this time, this article is going to provide you with several guidelines that you can follow for the installation method. Thus, just take a look at the following information.
The first thing that you need to do is to strip the plastic jacket at the end of your fiber optic cable. The optic cable ends have jackets for avoiding any damage in the shipping and delivery from the manufacturer. And then, you have to clamp the plastic jacket by using fiber optic stripper instruments which has designated slot to suit the size of the fiber optic jacket. Then, you need to squeeze the stripper handles like the pliers. You must pull away the jacket from fiber optic cable.
The second thing that you need to do is to open the back chamber of the epoxy glue gun that you can do by twisting off the back cap. After that, you need to insert the epoxy glue tube into the chamber and then squeeze gently. In this step, you will need a few ounces of the glue for the task. After that, you must screw the cap back on the epoxy glue gun chamber.
The third thing is to inject the epoxy glue into the socket of fiber optic connectors. Every connector has two sockets on each side of it to create the connection. Furthermore, you must insert the glue gun to the connector socket. As a way to insert the glue, you must press and hold the trigger. The glue spot must not be bigger than an eye pupil.
The fourth thing is to put one fiber optic end into the sockets of the connector. You need to hold the cable in the socket and count to 10. After that, you should let go of the fiber optic cable and connector. Make certain that the cable keeps in place once you let go of it.
Finally, you must locate the fiber optic connection to the epoxy curing oven. The oven should be turned on and the timer knob should be turned to six minutes. In this process, the fiber optic connectors that attached to the cable into one of the curing oven slots should be inserted. Then, you should press on the start button on the oven and pull out the connector from oven slot. In order to know the stability, the connector end needs to be wiggled. When you see that it is breakable, you can try to reinsert the connector to the oven and you should cook it for just some more minutes.
By looking at the details about fiber optic connectors, you can find another tools related to fiber patch cable. This will assist you to get the further information you are looking for.
Removable Media Questions.?
1. You installed a floppy drive that you want to
function as the A: drive, but your system won’t
boot to it. What is the most likely cause of this
problem?
A. You attached the drive to the middle
connector on the cable.
B. You attached the drive to the end connector
on the cable.
C. You forgot to configure the CMOS settings
for drive A:.
D. You forgot to configure the CMOS settings
for a single floppy drive.
6. If you have two floppy disc drives in your
system, which one receives the drive letter A:?
A. The drive jumpered for Master.
B. The drive connected to the primary floppy
drive controller.
C. The drive in the middle of the floppy cable.
D. The drive at the end of the floppy cable.
15. Which of the following kinds of discs is the best
choice for performing regular backups?
A. CD-ROM/XA
B. CD-Interactive (CD-I)
C. CD-R
D. CD-RW
1. is ambiguous
primery it's A because the middle connector is for the slave drive (only the master drive is bootable, the one connected to the end connector).
secondary it could also be C. if there are other bootable drives (CD/DVD, hard drive) it depends on the boot order defined in the CMOS. if the floppy drive is the only bootable drive the boot order doesn't matter.
6. D, because the floppy drive at the end of the cable is the master and becomes A: while the one in the middle is the slave that becomes B:
15. D, CD-RW because this is the only rewriteable media (you won't save tons of backups)
ASUS Eee Pad Slider Review (Slash Gear)
Tablets took ASUS by surprise this year. The company revealed its two models,
the Eee Pad Transformer and Eee Pad Slider, back at CES 2011 in January, and
went on to see the Transformer become a sell-out success. The Slider SL101,
meanwhile, failed to appear on schedule, and it's only now - ten months after
[...]
CPGear - RASP Sling - Product Review
